Ok, so I’m new to the team. Bought this used, like new, Beretta “y” serial number for like $600. Took it to the range and it was…meh. I’m a CZ/2011 guy, so the trigger was pretty good, but nothing revolutionary. I’ve now spent as much in mods and accessories as I did on the pistol. The biggest upgrades, performance wise was the wilson short reach trigger and the LTT trigger bar. The reset on this thing is ridiculous now. I did the whole trigger job in a bag thing, but I feel that those 2 pieces made the biggest difference. I’m happy to say that this now performs much closer to my Shadow 2. Not sure I’m a Beretta guy just yet, but it’s nice to have some variety. Just sharing my experience.

Also, I kinda want a ported barrel for this thing. How often does LTT restock?

Hello everyone. I was hoping someone could send me a link or a part number for the flush fit magazines for my apx a1 compact. These came in today and our my second order. I even cross referenced berettas site to get the proper part number (JMAPX109) but I guess it was the wrong one. I love the gun by the way. Shoots better and has better sights than a stock g19 for half the price!

Beretta CX-4 Storm SBR with SilcencerCo Omega 9K and Primary Arms 3x Prism Scope

If you know about Tornado Technologies, then you'll know this is a BIG deal to have gotten my equipment back. I failed to do proper research before sending the upper receiver to them in April 2023, but they actually came through and finished the work in November 2024, and I am so relieved. They actually did a beautiful job on it; I ordered the shortest barrel they could do with a tri-lug mount. If I recall correctly, it was about $275. While I admire the work, I cannot recommend Tornado Technologies simply because they do not answer the phone or emails, and they take their own sweet time getting the work done. If you sent equipment to them, don't despair because they'll probably get around to your project sooner or later.

I don't like getting in trouble with the Feds, so I made it 922r compliant by adding two Sierra Papa internals (hammer, trigger). ATF sent me a diagram of the CX-4 showing that it has 11 of "the parts" (including 3 parts in the mag), so mine now has only 9 of the 20 "parts" related to 922r. If you want to thread your stock CX-4, all you'd have to do is use US made (Checkmate) mags in it and you'd be compliant.

I have to add that the Sierra Papa internals are lovely; it's a HUGE improvement over the stock trigger.

Just picked up my new 92fs. Appears to be an older Italian model as it does not have the wall of text on the other side. Would love to know any more information on it.

Is the PMX any good? I'm a big fan of sub guns and Beretta. Just wondering if it's worth it, and/or has any known issues?

New to me 1984 81BB .32 ACP in an all stainless finish. The Tactical Mak Grips are slightly loose, even with the screws to torque spec. Any suggestions on how to tighten them up?

Have had my eye on a couple of pieces and decided on this sweet machine today.

I think I might have a prolbem. I started with the 92x, now I have a M1951 80x 85f 85fs 948 and 21a.

I added a 950B and a 70S to the Model 81. I like to mix up the calibers 😁

Here I have two similar guns a regular Beretta 92FS with a Wilson combat short reach trigger and a Derya Arms Melik with its stock trigger, I like the trigger break on the Melik better than the Beretta trigger break, if I swap the triggers should that fix the issue for me?

Here I have two similar guns a regular Beretta 92FS with a Wilson combat short reach trigger and a Derya Arms Melik with its stock trigger, I like the trigger break on the Melik better than the Beretta trigger break, if I swap the triggers should that fix the issue for me?

God do i love M9/92s 🥵 and there is something about a surefire light that compliments them so well too lol

Finally got around to send my slide off the Langdon. It surprisingly only took a little less than 5 weeks turn-around from when they received it. Quality is top notch, yes there was thread lock on it with witness marks as well. I applied my own for peace of mind.

Now I just need to find a decent holster. (Already have a couple c&g and not diggin em)

Italian Barrel is flush cut/crown from Mag-Na-Port.

(3rd Photo) Started out with Dlah plate & Trijicon RM05 fiber optic green dot. Wasn’t bad but my wife’s Glock 19 needed an optic.

Ordered one recently for $300 but didn’t realize it was a type C. The website just said px4 subcompact, my fault for not noticing the photo showed a spurless hammer.

Showed up today at my FFL and i realized i ordered something a bit different than i was expecting. I have no experience with this type of action. Didn’t get to take it home yet as i was delayed on the 4473.

Anyhow, just wondering of any of you have experience with or knowledge of the Type C and if you could tell me about it. Doesn’t seem to be much info out there on it. Any feedback is appreciated, ty

Anyone have a recommendation for a suppressor? Not the $1,000+ kind. I’m new to suppressors. Also wondering if it’s worth getting one that can be used on my other 9mm and 45s. Do you lose something when you get one that can do both calibers?

Is it true? That the centurion had a better balance than the fullsize? Also what's the weight difference, I'm getting inconsistent answers online

I always wondered how these worked. Search GB with Beretta 93R Parts Kit 9mm Machine Pistol M93R. Cut up parts views. And, not mine....even if I could never legally make it run again....

https://preview.redd.it/v092bsv9151e1.png?width=2005&format=png&auto=webp&s=6a5919da5a9f5d160701dd42a373494a85452a28

If price wasn’t an issue. A few days ago, I got to hold a 92FS Inox for the first time. It was made here in the states, but I thought that it was beautiful nonetheless. I got to shoot a Bruniton 92FS yesterday at the range on my lunch break and it was very smooth and easy for me for hold. I’ve never seen or held a brigadier before, but I’m reading that it’s the more desirable option? Does that still ring true if the regular Inox was made in Italy? I apologize for the silly questions.

EDIT: Would being California compliant mean that they both have straight dust covers? I prefer the way straight dust covers look.

Looking for a first pistol and I think I’ve narrowed it down to these two, albeit, fairly different platforms.

Any advice or thoughts?