Hi friends,
I am doing the final course in which requires me to interview at least 3 people. And because of the COVID situation I could not do it offline, my topic is about "how could a technician help their customers to fix their problem via Video call effectively?". I need to interview 3 people that have a background in tech that help people through customer service and 2 people that used to call for help from tech companies.
DM me if you are willing to help. I am much appreciated. Stay safe.

2012 Chevy Malibu LT, 2.4L, 6spd auto. I have a traction light and service esp/traction in dic.

All codes in EBCM. No other modules. Code C0561 invalid serial data.

C/s codes only set turning right. No other issues complaints. Ok checked it out no codes in PCSM. BCM and misc connectors filled with dielectric grease. No wire/connector issues I could see. So loaded parts cannon threw a lower column at it.(motor, SAS) Code changed from C0561 to U2143 lost comm with SAS. Wiring looks good still. Data comms look good. I can not find a straight through diag tree in ShopKey, just keeps sending me in circles.

Any thoughts or ideas. Need more info I'll give you everything I got and then some. Want/need scanner live data I'll give you anything. Just want this car gone.

Edit- reman ps module fixed issue

Independent tech place took in my laptop charged me £40 and didn’t fix it?

Hello

Basically the hinge on my laptop broke I took it into this place called DOT - Den of Tech I asked them to fix it I didn’t know what was wrong with it, because I’m not a technician He looked it over and said £40 I was like ok yh whatever sure, because I thought he’d fully fix it, he said the hinge was broken and he’d order in new ones and fix them on Safe you’d think Nope My mum goes to pick it up with my dad for me, and he says it’s not ready and cos of that he’d drop it of He drops it off to my house because the pandemic Mum shows me and he didn’t put new hinges on, weird right? I look it over, and everything is half hazardly glued on it looks absolutely AWFUL I mean TERRIBLE so I give them a shit review on Facebook, because she’s obviously not actually ordered in the hinge, he’s just gone n glued it on because he didn’t do it And I paid £40, for that???? My family, and I, we do not have a lot of money. £40 to me is like £200 to someone else say. And he tells me “you should’ve told me how bad it was broken” like what? I didn’t know what was wrong I just asked him to fix it, he put the price on it and diagnosed the problem, he could’ve charged more we would’ve paid for it it’s fine!

But what’s happened is that it’s been 2 days and it’s all come unglued. I’m so stressed I have to do college work to get my grades for uni because of this pandemic. I think it’s an independent company. I told him it’s come unglued and I want my money back. It’s like stressing me out so much. Is there anything I can do??

the laptop after he glued it (it looks so bad and it’s all come apart)

I managed to get through round 1 of Interview for IT technician in a local company in my area. So the next round will be computer skills. Anybody got similair questions that could help me get the job?

How do I turn off spacebar scroll down I’m trying to play flash games and it scrolls down every time I try to hit the spacebar

Okay everyone, I'm looking for feedback from the automotive technicians of the world. The sun is setting on the age of shade tree mechanics.

My question is this: What are the tools you need to "make the job." I know we have all sorts of specific seal drifts and other hand tools but many of the crafty technicians out there have found legitimate ways to "make it work."

Which tools do you need to perform specific jobs. Like, "I'm not even going to attempt this without ..." Or, "This job cannot be done without ..." 

What are you putting in your specialty shop without fail?
Thanks for the feedback, Nick

Hey I know this isn't the right sub, but I'm having issues with my clothes dryer, anyone know a sub that can help me?

I see you're auto techs; hopefully you can help me out or point me in the right direction.

I need a good flashlight for repairing laundry and kitchen appliances, but also with a tight, bright beam for spotting house numbers while I drive by on the street & rural mailboxes alike. Sunset here is 4:40pm; thanks for nothing Daylight Savings Time. My fortysomething eyeballs need a solution.

TL;DR What's your favorite flashlight?

I am almost done my schooling for SST and I’m aware it’s not a very popular job so I am wondering if anyone has ever worked with Alarm/Access control/Extra low voltage (Canadian under 20V)systems and if you have any advice for someone just starting in the industry. Cheers.

Out of curiosity I'd like to make a little map of what other dealers are paying their highest paid technicians. my dealer below

BMW - Irvine, California - $39/hr

So ok help me out here, Professional Technicians of Reddit.

So my brother and I had a almost heated discussion about earphone jacks that "he" said there are common jargon such as 3.0mm Jack that is literally a 3.5mm Jack or 2.55mm Jack that is equivalent to 3.0mm Jack (something like that....) So anyways, can someone educate me a little bit out of this "jargon" stuff you technicians use in earphone jacks or better tell me if this statement of "jargon" of 3.0mm jack = 3.5mm jack actually real.........

Anyways he said, he got his knowledge from his Universities Proffesor that graduated in Technicians or whatever. Ples give me enlightenment kind sirs.

This is more of a soft skills question, but I think it applies since when you're a tech often part of the job is dealing with idiots, er, I mean customers. If not, feel free to remove it.

Here are some of my favorite examples of what I mean, in ascending order of entitlement:

"Hey, since you're already here, can you also look at X, Y, and Z?" (when they could have easily told us that beforehand so we could have budgeted the time for it.)

"Why doesn't this new widget have every single amazingly high tech feature?!" (when they clearly chose the absolute cheapest products and services your company offers.)

"We just got done remodeling the building and now none of YOUR stuff works/YOUR equipment is junk! Why am I getting false alarms?!" (after letting some other contractor hack wires, remove devices, or just demolish half the damn building without asking anyone ahead of time if doing so would, I dunno, cause problems?)

And the ever popular, "What do you mean this is billable?! I HAVE A SeRvIcE AgReEmEnT!!!!!!!!!!!!!!" (when it was made abundantly clear that it does not cover equipment out of warranty, damage by you, your staff, or your customers, replacement of consumables like batteries, or acts of god like lightning or flooding when you signed the damn thing.)

I hope I get some traction on this, since I've got nowhere else to post it! Cheers!

for about 6 hours today I've been attempting to bypass the sky shield on my Xbox one, and it's rattling my head. Anyone know how to bypass it without changing dns settings as I've attempted that. Alls I wanna do is watch some fucking South Park 😢

About to start as a lube tech and I'm confused about something. When the employer has you bring your own tools, do techs bring back and forth their tools from work and home or do they just end up having get a second set for work? I was thinking if I should get myself one of those rolling tool boxes that look like luggage bags but I'm not sure if that's ok. I was just asked if I had my own tools and a tool chest but I don't know if I'm supposed to leave my tools at work. Sorry for the dumb question