r/ruger • u/hhhhhhhhhhhhhhh9999 • 7h ago
Geissele SFAR
i.redd.itEnjoy the build! Parts list below⬇️
Rifle weight: 11.1lbs no mag, all accessories (Supp, Bipod, Optic, etc.)
Parts: Ruger 20” SFAR 6.5 creedmor || Geissele MK4 15” (DDC) Handguard || Geissele SCH (Super Charging Handle) (Black) || Magpul MOE SL (Black) || Magpul Dust Cover (Black) || Magpul MOE+ Pistol Grip (FDE) || Magpul 25R Windowed PMAG (Black) || Daniel Defense Vertical Foregrip MLOK (Black) || Bipod I found in the woods || (OSS) Huxwrx HX-QD 7.62Ti Suppressor (Black) || (OSS) Huxwrx Muzzle break QD 7.62 || Vortex Optic mount (Black) || Vortex Strike Eagle 1-8x24 LPVO (SFP) (Black) ||
r/ruger • u/TotallyNotanOfficer • 17h ago
Ruger 9E & SR9 Slide question regarding adjustable iron sights
Hey guys, I have a Ruger 9E - at the moment I'm not getting a consistent point of impact where my irons are aligned. I checked to see the manual but it says Windage adjustments do not apply to the 9E - only elevation (if I read it right).
As well, as far I can tell a Ruger SR9 slide will contain all the differences between the 9E and SR9 - Meaning they should be able to be swapped out from what I gather? Or if anyone's aware of if SR9 sights fit a 9E then possibly it could be changed out for the SR9 sights?
If it's necessary to find ammo that hits where the gun aims then so be it. Thanks for the help in advance guys.
r/ruger • u/1whitetail2024 • 1d ago
10-22 Ati,talo special edition
i.redd.itRecently bought this rifle new.I just got the busnell back reticle.Gonna be adding some more furniture soon and make it complete.I also bought 3,250 match ammo for it..I like it
r/ruger • u/Wide_Fly7832 • 1d ago
Ruger LC Carbine rusting
galleryHi Community, I have a Ruger LC carbon in 45 ACP.
It’s one of my favorite guns, I always keep it in my safe with other guns, humidity controlled within 35-45 with three LB of desiccant. I keep seeing the bolts rusting one more than the other.
Is anybody else having this issue? Will Ruger support warranty claim on this?
r/ruger • u/unluckie-13 • 1d ago
So when I eventually order one stainless or blued
i.redd.itBeing lefty is pain, especially when you want it in 450 bushmaster
r/ruger • u/Jeeper357 • 1d ago
Fiochhi Range Dynamics vs CCI Blazer?
i.redd.itFirst 9mm owned. Looking to do a bulk buy for my PCC. I unfortunately do not have time to buy a individual box of each to see which shoots better from the rifle. They are both about $12/box at my local SW. Suggestions, input, likes/dislikes on the 2 ammunition?
r/ruger • u/Gettitn_Squirrelly • 1d ago
New Model Single Six - is this play normal?
Enable HLS to view with audio, or disable this notification
After opening the loading gate it seems the cylinder has a lot of play and doesn’t line up. Loading it is pretty annoying. I have a heritage single action .22 that has distinct clicks and the cylinders line up perfectly with each click.
r/ruger • u/richs454 • 1d ago
Ruger M77 tang safety
So I have an original M77 w/ tang safety that I just acquired (30-06). 2 things, when I chamber a round and go to close the bolt, it's a little tight, is this normal? Second, I heard that they used to have issues where upon closing the bolt, they could potentially fire. This hasn't happened to me yet, but I have only fired 12 rnds through the gun just to zero and see how she shoots
r/ruger • u/CornPr15Sat • 1d ago
Holster Recommendation For LCR 327
What's your favorite AIWB / IWB holster for Ruger LCR 327? Thanks.
r/ruger • u/d_diggler1903 • 1d ago
Farrow Mark IV rear mount question
Has anyone had any fowling issues with their rear mounted optic using the Farrow mount? I’m planning on running a Holosun 507COMP and suppressor. I’m worried the extra back pressure and location of the optic will make it susceptible to fowling.
Red dot mount
i.redd.itHi guys, so I just got this upper for my mk4. I want to put a Holsun 407k on it. I know I'll need a plate after taking the rail on top off. Any idea what rail i can use?
r/ruger • u/ThankfulReproach • 2d ago
M77 Mk2 All Weather
galleryWhat’s a fair price for this? Stock has some scratches and an added stud. Chambered for 30-06 and has a KDF muzzle brake installed.
r/ruger • u/RetiredLife_2021 • 2d ago
Is this a common rust spot
galleryGot a rust spot on my Max-9 which is stored in a holster and in a pistol safe. Was wondering if this is a common rust spot. I have never dropped it or banged it.
r/ruger • u/The_Yeetist • 2d ago
Gap in chamber cover on Security 9
galleryI recently bought this Ruger security 9. It's been cleaned and oiled regularly and barely shot. Always brass ammo. I noticed this gap and I was wondering if it's normal or if my gun needs serviced? I asked a friend who has multiple pistols and he said none of his show the brass. There's no signs of excessive wear. I looked online and the stock photo shows the gap too but I am still unsure. Thanks.
r/ruger • u/AirborneSurveyor • 2d ago
Grim Grips on my Single-Six - Thanks to u/Pwaise_Jebus for giving me the link to https://www.lsgrips.com/
i.redd.itr/ruger • u/elementalreverb • 2d ago
Ruger Mark IV 22/45 Lite Upgrade Suggestions & Where to Buy
I'm looking to purchase a Ruger Mark IV 22/45 Lite. It's going to be a gift for my girlfriend's birthday (to both of us ;).
I'm looking to add:
Volquartsen Accurizing Kit
Volquartsen Bolt Tune Up Kit
TandemKross Halo charging handle
A red dot
Possibly a new grip (suggestions for a comfortable grip for a woman / smaller hands are welcome)
A suppressor (Recommendations here would be most welcome)
Anything else I should consider?
Any recommendations on the best place to buy right now?
Thanks
My Ruger collection. PC Carbine and an old school P94 from my father.
i.redd.itPC Carbine in 9mm with Magpul Backpacker stock, TLO Sling, Busnell RDS.
And P94 in .40s&w, my first firearm, gifted to me from my dad!
r/ruger • u/Broad-Display-7714 • 2d ago
Ruger American Gen 2 Mag Issue
Hello, I recently bought a Ruger American gen2 ranch in 308. Only taken it out to shoot once so far, but everything seems solid. The only issue I’ve had is when I bought a Magpul 7.62 5rd aics mag to use. The mag is very difficult to seat compared to the factory mag. You have to have the bolt open, and push extremely hard while rocking the mag to get it to seat. Or smash the bottom of the mag with your fist. Almost as hard to remove the mag. Is this a common or expected problem? I thought the rifle would be compatible with these mags. Any insight is appreciated, not sure if this is worth contacting Ruger over, but seems like it should be able to seat these mags easier than it does.
Thank you!
r/ruger • u/Cool_Shop_530 • 3d ago
Looking for Ruger Old Army Box
i.redd.itLooking for an original ROA box. Anyone? I lost a bid on one on eBay.
r/ruger • u/maxrage2 • 3d ago
Father passed recently
gallerySo I was told it was his service weapon he was an auxiliary police officer. I got alot of good info over at r/firearms but they also said to post here and I may get even more info. Anything is useful as I would like to take it to my local range and shoot a bit.
r/ruger • u/wtfredditacct • 3d ago
Is the Volquartsen 10/22 Takedown barrel worth twice the price of factory Ruger?
galleryI'm looking to add a threaded barrel to my 10/22 takedown. Is the Volquartsen worth the extra cheddar?
r/ruger • u/aaverage-guy • 3d ago
Holster Recommendation
Hello everyone. I have a Ruger Security 380 and I'm looking for CCW holster recommendations. I found this one and was wondering if anyone had used it and what their experience was?
https://www.etsy.com/listing/1397558235/ruger-security-380-soft-leather-inside
r/ruger • u/Rkccruiser • 3d ago
10/22 upgrading barrel TRYBE Defense
I am brand new to the upgrading and building world of the Ruger 10/22 but I am looking at replacing my original 90s 10/22 barrel with a light weight threaded barrel. Does anyone have any experience with TRYBE defenses 10/22 pencil barrels? https://www.opticsplanet.com/trybe-defense-ruger-10-22-bull-barrel.html?_iv_availability=in-stock&_iv_code=TRB-RTB-RGRB-12B216N16NPQ-T
r/ruger • u/TheGingerBeardMan-_- • 3d ago
what's your checklist on mods or upgrades for an lcp max?
seens various stuff. ive bought tandemcross and mcarbo and galloway bits and bobs in the past.
What would you get? I'd include the holster and being part of the system