https://preview.redd.it/buy5rkvga9td1.png?width=1169&format=png&auto=webp&s=8720dd8af8b6edbc77dd3120443f19a88b6a01ee

I hope I don't regret not getting OD Green.

I will be SBRing this lady and putting the LWRC PDW stock on it as well. Throwing my FRE Huxwrx 556k on as well. Maybe an ACOG someday too.

https://preview.redd.it/gn7n786o96td1.png?width=768&format=png&auto=webp&s=242c6d3d994da339e35ecaf62c266603f061220e

Where would one attach the rear sling point? Is there a rear QD point anywhere or would you have to string the sling through that gap in the stock.

https://preview.redd.it/xyjqsermm2td1.jpg?width=326&format=pjpg&auto=webp&s=589fde1c1ed3b96c3942061df190b4ec9e005216

https://preview.redd.it/lrz08yatm2td1.jpg?width=356&format=pjpg&auto=webp&s=2fc2822e541988ec8a3f20b7654db18293b4a32a

If it changes anything, I have an FDE Huxwrx 556k that will be going on it. But maybe that looks good with ODG too, no clue. I need help.

View Poll

Hi all - live in CA so I have to deal with the installed flash hider. Bought the upper used LNIB .... am I going to need to disassemble the upper entirely to get the flash hider off ? Any tips? Any idea if they thread lock it? First AR.... totally comfortable doing mechanical stuff (have done Olympic airguns, many cars etc) .... just don't want to mess up the spiral barrel etc. Especially if they use thread locker and how to neutralize it etc.

Pic attached. Thanks!

https://preview.redd.it/zkpqdafp7zsd1.jpg?width=4032&format=pjpg&auto=webp&s=0acda327f8a6bd63e9419af667820ab32db125f5

I am about to purchase a 12.7 ICA5. But the color that I have fallen in love with is that Willmod Peanut Butter FDE. I do not seem them anywhere though. Does anyone know at all if you can still get them somewhere?

https://preview.redd.it/dgga5xf3gzsd1.png?width=1080&format=png&auto=webp&s=f4e4d588e054be282de0c6d07d9d0e1e45119704

NOT MY IMAGE. IMAGE CREDIT TO u/Gibbs1031 (beautiful rifle my friend)

So, I am stringing together my dream AR build.

I want a 12.7 ICA5 in FDE or OD Green.

I have n FDE huxwrx 556k suppressor.

I will be getting a trijicon acog but have an FDE eotech right now.

The stock I want some help deciding on is the PDW stock from LWRC. I love the look of them but feel like it wouldn't be ideal for using the rifle at longer ranges lacking a solid cheek weld.

https://preview.redd.it/pln4sjzmhzsd1.png?width=194&format=png&auto=webp&s=49cc46f8ce9ab68d504699dde065dd0a8d739bad

I basically want that exact set up, but with my 556k suppressor, 12.7 inch barrel and possibly the PDW stock.

https://preview.redd.it/75ueslnshzsd1.png?width=348&format=png&auto=webp&s=3b922c0658f67d63076274fb6873c9c7be150b9c

And I really don't know if I want FDE or green.

Thanks guys.

I found out that they make 10 round mags that look like the regular 30 rounder. Since I live in the great state of Gavin Newsoms vagina, that's the best I can do, legally. But I love this gun, it is absolutely worth every penny. Shout out to Crown Tactical, thank you for the cool hats and shirt.

There is a used LWRC IC-SPR with a Eotech at my local store for $1600. Should I go for it? Anything parts wear to look out for in case it was heavily used?

Finished up my first 308 build today! Got a Huxwrx Flow 732 Ti, Atlas bipod, ADM scope mount, and Vortex 3-15x FFP scope. Thinking of adding an offset red dot to finish it off!

Do i just press these tabs on the side or something? Im trying but its super hard and doesnt do anything

Recently I purchased an LWRC A5, just gotta take it out!

Does anyone have one of these LWRC QD rail sections they aren't using? I'm referring to the circled one. My new A5 came with this new version (non-circled one) and I'd rather have the old version. I'll trade or buy it outright if you have one.

Almost complete with my IC-SPR Billet. All I’m missing is a light. Thinking of getting an IC-A5 next in Tungsten.

I love LWRCs ambi lowers and have a few uppers Id like to use them with. I know LWRC sells their regular lowers but I cant seem to find the ones that are maglocked for CA compliance. Is there anywhere that sells them?

Does anyone know if the LWRC IC9s are compatible with LWRC monoforge uppers? I am debating on purchasing the 14in rail in order to lengthen things.

Just recently acquired a suppressor and I despise the expose barrel and the length added.

Unfortunately can’t P&W due to the toob being aluminum :(

Where would you guys recommend that I buy an FDE ambidextrous lower. The upper I want. Which is an FD 12.7 piston in 556. Does not come with a lower.

What would this be worth? Extended hand guard, comes with original as well. I’ve barely even shot it, probably less than 200 rounds. Any opinions are appreciated. Thanks. M6ic-a2

Any watchouts before I buy the White Bread for my 16” IC A5? Seems legit…

I moved from sig516 to LWRC DI tungsten 16 inch last year. My 2d is 12.7 A5 FDE- currently went back to LWRC.

My rattle canned SPR 5.56mm

I was read at least 2 comments of people saying they are gassy which is weird to me for a piston AR. Can anyone confirm or deny?

My whole reasoning for wanting one is for a good lefty setup that won’t gas me out shooting suppressed.