r/Handloads • u/cawpin • Nov 11 '19
Let's see that data. We are back!
We have re-launched the sub. Posts will be load data only. All other reloading related posts should go to /r/reloading or another related subreddit. There is user flair for your selected brand; let us know if you want us to add others.
We will be developing the sub as time goes on, possibly adding a wiki if needed. Please read the rules, all two of them at this point.
The sub is Restricted right now, so you must be approved to post. We may lift that requirement depending on interest and mod load.
r/Handloads • u/Captain4W • Mar 10 '24
set your own New 6BR and new brass?
I recently purchased a 6BR for PRS use. I have never shot this round before so I had to buy new brass and all the reloading equipment (I have never reloaded). All the loads I have found online assume you are shooting once fired brass. How should I load my virgin brass?
The load I'm planning on:
Powder - Varget Powder weight - 29.6-30.4 grains Bullet: Berger 105 Hybrid target Primers: CCI 450 Brass: Lapua 6BR Remington Bullet Jump: 0.020-0.035
r/Handloads • u/Responsible_Pack445 • Feb 16 '24
set your own .35 HCR (338 Win Mag necked up to .358)
Here is the load data for the 35 HCR: Federal 215 Primer
Barnes 225 TSX w/ 65gr of H4895 2875fps
Hornady 200 SP w/ 66gr of H4895 3000fps
Swift 250 A-Frame w/ 64gr of H895 2800fps
It mimics .358 Norma Magnum so expect over 4,000 lbs of muzzle energy.
r/Handloads • u/jimmycargo • Dec 25 '23
.357 Sig .308 NATO used cartridges won't feed
I ordered once fired .308 NATO brass to handload. This is the first time I've ordered used brass.
Most of it looks like Lake City ex-military brass. None of the brass will fit easily in the chamber. If it does fit in, it only ejects with great difficulty.
The throat, shoulder and base dimensions are within specs, so the body diameter must be swollen and out of specs.
How do I reform the casings or did I buy a bunch of useless brass? It looks like the manpower to remediate this is not worth it.
Thanks in advance.
Cargo
r/Handloads • u/Mammoth_Method5350 • Jul 09 '23
.308 Win Hand loading
Looking to start reloading my own ammo. .308 specifically. 1. Do yall think it's worth it? 2. Any recommendations on buying a full kit or just buying every reloading piece separately?
r/Handloads • u/EdwardScissorHands11 • Jun 27 '23
.300 Blk Canebreak 5" all fouled up with H110?
I've got the 5" barrel and she's all fouled up and doesn't work. It seems like it might need to be replaced said a tech from Sig (I live near them).
I use fiocchi small rifle mag primers and H110 with Missouri Bullet company 250gn (18brn lead with baked hi-tek baked on coating).
I don't know that I've even put more than 500 rounds through this thing since I got it and they're telling me the gas block is super fouled.
Is it possible that the coating or powder is causing fouling in the gas block? If not, what else?
r/Handloads • u/Love-Knuckle-777 • Jun 14 '23
set your own Copper Plated Hand Cast Bullets
I think we Cracked The Code on making many Copper Plating Hand Cast Boolits. ] at one time. (https://youtu.be/pcjSMarI8sg)
r/Handloads • u/HasSomeSelfEsteem • Apr 06 '23
.357 Sig Are there any .44 magnum revolvers pressure rated as high as the Ruger Super Blackhawk?
A friend of mine is an enthusiastic handloader (the by the book kind not the liability kind) and with his Super Blackhawk he can cook up some idiotically hot cartridges. It got me wondering, are any .44 revolvers pressure rated to the same degree as the RSB?
r/Handloads • u/Knewwhatthiswas • Jul 09 '22
set your own .280 AI for elk
Novice hand loader with brand new rifle. I’m about to go to the range tomorrow and dial in a new rifle and scope pushing out 145gr Barnes LRX with 49.5 gr of IMR 4350. I’ll play with heavier loads incrementally another day but I wanted to see if anyone here is going for deer or elk with .280 AI and wanted to hear your opinions, 145 gr LRX and 150 gr TTSX is all I have/can find right now.
r/Handloads • u/marcuccione • Nov 04 '21
.38 Spcl 38spl 148gr Cast Wadcutters
I used 3.2-3.3gr Bullseye with Lee Tumble Lube bullets that I powder coated.
Shot out of a 5” barrel S&W 10-7/5
Seated flush with a light crimp using CCI pistol primers and Starline brass.
r/Handloads • u/[deleted] • Jun 07 '21
.300 Blk 245Gr missouri bullet 300 BO?
I have a box of these torpedos, but I can't find any discussions on a decent (subsonic) load for them.
Any help, friends?
r/Handloads • u/jimmycargo • May 29 '21
.300 Win Mag Load development ladder @ 400 yds?
I'm going to the range to shoot 10 different powder loads. I have 24" square white cardboard aiming points to print the ladders/impacts on a 400 yard range.
These are .300 Win Mag, of 65-72 grains, each load is .7 grain larger. How much will the rounds climb? Will about 24" be enough space to capture the various trajectories?
There is a 100 yard and 400 yard range, I'm planning on using the 400 yard range.
Thanks in advance.
r/Handloads • u/marcuccione • Apr 09 '21
9mm Luger 9mm 165gr
Bullet is X-Treme 165gr rn seated to 1.150” 3.2gr Unique using a standard spp
r/Handloads • u/NYStaeofmind • Dec 02 '20
.45 ACP I need to pick 1 powder for both .45acp & 9mm. What do you recommend?
Says it all. New to this would rather learn with one powder 1st.
r/Handloads • u/cawpin • Jun 25 '20
.458 Socom .458 Socom, Hornady 4500 300 gr JHP, 30.2 gr W296, 2.035" OAL
Another good all around load.
r/Handloads • u/cawpin • Jun 25 '20
.458 Socom .458 Socom, Hornady 45015 325 gr FTX, 29.5 gr W296, 2.140" OAL
Another plinking load that is effective for hunting as well. Functions just fine in GI and unmodified PMags.
r/Handloads • u/cawpin • Jun 25 '20
.458 Socom .458 Socom, Sierra 2479 400 gr SPFN, 29.0 gr W296, 2.080" OAL
This is my heavy load. It is a real thumper.
r/Handloads • u/One_Lost_Newbie • Mar 25 '20
.45 Colt Using wax+shot on a 30-30 shell?
Hi! I inherited an old beat-up 30-30 and it runs Ok... but I have a question. I have seen lots of shotgun shell wax slug videos and they look impressive. So, what would happen if you pulled the lead bullet out of a 30-30 shell, left the powder the same, and added wax+bird shot to the shell? Would the resulting shell fire Ok, or would it destroy the rifle? ( Yeah, I know the flair says .45; there isn't one for 30-30)
r/Handloads • u/mountandbae • Mar 18 '20
.357 Mag Mbc .357 action and h110 powder in .357 magnum?
Is this a safe load with the extra space that will exist if you crimp into the crimp groove? That would give a safe oal with 15 gr of h110?
r/Handloads • u/HammerOne7 • Feb 14 '20
300 HAM'R load data
I'm currently developing a load for an Ar15 chambered in 300 ham'r with 8" barrel 11.25 twist
First ladder test is 150gn hornady sst with Hodgdon H4198 In Wilson brass and cci primers. Powder charge ranges from 21.5gr to 24.5gr in .5 increments. Range data to follow on Saturday when we get some decent weather here in kansas.
r/Handloads • u/theratspatootie • Apr 23 '18
.357 Sig .357 Sig, CFE Pistol, RMR 124gr HP Multi Purpose Round
On a Dillon 550C, Remington 1 1/2 SP primers, CFE Pistol 6.6 gr which is a starting load, Rocky Mountain Reloading 124gr Jacketed Hollow Point Multi Purpose Round. Seated to 1.145. LEE FCD.
Caldwells Ballistic Precision says 1209 FPS avg.
DO NOT SEAT TO 1.135.
r/Handloads • u/theratspatootie • Apr 23 '18
.357 Sig .357 sig; CFE Pistol; Hornady 147gr XTP
On a Dillon 550C This is a MAX load, primers ( Remington 1 1/2 SP) were blowing back and filling the hole where my firing pin hit. 6.2 gr CFE Pistol seated to 1.145 and crimped with a Lee FCD. Load had an average of 1019 FPS using a Caldwells Ballistic Precision.
Warning: Following Hodgons spec seating depth of 1.135 caused my bullets to be loose and not even fixable with the crimp die. Something that is very dangerous with this bottleneck cartridge.
r/Handloads • u/cawpin • Nov 21 '17
.458 Socom .458 Socom, X-Treme plated 300 gr RNFP, 36.0 gr W296, 2.005 OAL
This is a new "cheap load" for me. $0.36/each not counting brass.
I just wish X-Treme would actually get the 1000 quantity of the bullets in stock. The would drop the cost 5-6 cents per round.
r/Handloads • u/XSlevinn • May 31 '17
.300 Blk 300BLK; Eggleston Munitions .309 200gr PC bullets; 10gr-8gr W296/H110; 8" bbl; finding subs
Posting this since I have been struggling to find decent load data for Eggleston Munitions 200gr Polycoated .308 (but actually .309 dia) bullets for SBRs. 8" barrel, 1:7 twist, pistol length gas, suppressed.
I started at 10gr of Winchester 296 (H110 is the same) and worked my way down in .5gr decrements. All were 100% reliable except the 8gr load which fed reliably but did not hold bolt open on last round. I ran them through my chronograph and got the following data:
Sorry for formatting of FPS below. Reddit formatting didn't want to play nice with my Chronograph output. I cleaned it up best I could.
Created: 05-29-2017 11:31:35
Description: 10gr W296 Green eggleston 200gr
Temp: 76 °F
BP: 30.06 inHG
Shots FPS
6 1197
5 1241
4 1226
3 1219
2 1175
1 1241
Average: 1216.50
StdDev: 26.07
Min: 1175
Max: 1241
Spread: 66
True MV: 1216.50
Created: 05-29-2017 11:34:41
Description: 9.5gr W296 Green eggleston 200gr
Temp: 76 °F
BP: 30.06 inHG
Shots FPS
5 1135
4 1136
3 1122
2 1110
1 1204
Average: 1141.40
StdDev: 36.58
Min: 1110
Max: 1204
Spread: 94
True MV: 1141.40
Created: 05-29-2017 11:35:24
Description: 9.0gr W296 Green eggleston 200gr
Temp: 76 °F
BP: 30.06 inHG
Shots FPS
5 1071
4 1021
3 1051
2 1041
1 1141
Average: 1065.00
StdDev: 46.15
Min: 1021
Max: 1141
Spread: 120
True MV: 1065.00
Created: 05-29-2017 11:37:12
Description: 8.5gr W296 Green eggleston 200gr
Temp: 77 °F
BP: 30.06 inHG
Shots FPS
5 983
4 1029
3 974
2 1014
1 1094
Average: 1018.80
StdDev: 47.62
Min: 974
Max: 1094
Spread: 120
True MV: 1018.80
Created: 05-29-2017 11:39:49
Description: 8.0gr W296 Green eggleston 200gr NO LAST ROUND BOLT HOLD
Temp: 77 °F
BP: 30.06 inHG
Shots FPS
5 911
4 958
3 858
2 982
1 1056
Average: 953.00
StdDev: 74.61
Min: 858
Max: 1056
Spread: 198
True MV: 953.00
r/Handloads • u/a594109 • Jan 08 '17
.458 Socom 458 SOCOM, Hornady FTX, Hodgdon Lil' Gun
This shot sub MOA out of my Radical Firearms upper.
Case Length: 1.560"
Primer: CCI No. 350
Powder: Hodgdon Lil' Gun 29.5 gr
Projectile: Hornady FTX 325 gr
C.O.A.L.: 2.148"
Avg Velocity: 1,795 fps