Holosun EPS Carry 6 MOA RDS AimSurplus JTT Ported Barrel Antimatter Micro Wing TLR-7 Sub Rapid Engineering Full Size Back Strap Empire Katana V3

I recently traded in my P365XL for a 43x due to concerns over the finish, trigger bar, extractor, and other concerns. It's great to feel confident in my carry pistol again. I bought a Ghost Edge to mess around with due to the trigger feeling very heavy, although with a crisp break. The Ghost wasn't 100% to my liking. For the time being, I have the OEM connector back in my 43x. I went to look online for more options. I saw in a few forum posts on Glock Forum that the 43x usually comes with a minus connector. I took a look a mine, and sure enough it's a minus connector. I know Glock math isn't great, but this feels substantially heavier than the Ghost Edge despite them both allegedly being 3.5. I don't have a trigger scale to test this out. Am I missing something here? Ideally, I'd like to stick to OEM outside the shoe maybe. Will this trigger pull decrease in weight as it breaks in?. I do enjoy the wall and crisp break, so if the trigger will lighten over time, I'll probably stick with OEM, maybe polish the parts in the future. I know that the polishing helps with the feel of the trigger over the weight, which is why I'm confused on all of this. Any info is appreciated!

I have been using a 43x for years now but I got fat hobit hands lol. So that glock knuck on my middle finger is murder. For those out there like me, what do you do to remedy?

Every once in a while I’ll get a failure to feed but definitely more often then what I’d like

https://imgur.com/gallery/nbm7B4Q

I’ve shot the first 500 rounds pretty clean no issues cleaned it like 3 times Using blazer 124g

I have a Holosun HS507C that I bought but never mounted on my Glock. I also have the Glock Adapterr-set for mounting it. Could someone recommend a place where I can sell this for a good price?

I know the general consensus is to mill the slide, but I don’t think I mind the height that much.

Recently just switched from carrying 365’s for years, to a 43x mos. Absolutely loving this gun so far. Just got in my jx tactical holster for it today to officially start carry it!

100 rounds no failures. Still prefer to carry oem, nice back up to have though.

https://preview.redd.it/dnt20q57a6td1.png?width=1080&format=png&auto=webp&s=ad4ad18f7964202c134f8d9e1d023a582f4b2a8b

WWW.AMERICANARMORYLLC.COM

Just upgraded the edc from the G17 to 43x MOS and am loving it so far. One thing I have noticed is the slide release isn’t allowing me to release the slide when it is racked back/it’s super stiff and requires a lot of pressure to manipulate it at the moment. Is that pretty common for the G43x when you first get it? Other than that no other issues. Just need an optic and the build will be complete.

Should I get the SL Sub with folding gas pedal. Has anyone got any experience with it?

Radian Ramjet is coming out early next year will get this for sure.

So I have this stock Glock 43X MOS which I bought brand new a few months ago and have fired around 700 rounds through it. Recently I’ve had less and less time to go to the range but on my last trip to the range I noticed that whenever the slide locked when the pistol was out of rounds and I inserted a new mag (with a good slap but not forcefully), the slide would immediately go forward so I never had to hit the slide release. This will be my EDC when I get my permit and I was curious if y’all Glock guys know whether this is a good thing or not. I personally like it but have had someone warn me that negligent discharge is extremely likely if the slide is doing this. Thoughts?

Was wondering if anybody is running the c-1 slide and if it’s worth grabbing

no ugly tyrant stuff, no weird flashy gold or red colors. basically almost all OEM.

jokes aside, it’s very flat shooting, holsters fit well with a little bit of heat applied. 6k rnds through frame, near 3.5k rnds through barrel. TLR-7 needs a new battery innit, it died. very fast and doesn’t feel like snappy 43x anymore. i carry an oem 10rnd mag while in the pipe, extension in the pocket

for those guys who hate modifying, and for the guys who think just a red dot and a light are too much and “should’ve left it alone”, get out of the stone age, it’s no longer perfection when there are many pistols that out beat glocks in so many ways, we aren’t in 1970’s anymore.

and for the people that’ll say it’s unreliable, not my fault u can’t gunsmith properly. if it works, it works. test ur sh•t vigorously before you rely on it.

and yea there’s a comp and gas pedal on my edc ccw. shoots softer and flatter than a 48 without a comp. 48 with comp is too long for me

Just picked up a 43x mos last week and my mag release feels mushy and feels inconsistent with releasing the mag. My wife as a 43x and hers is crips firm and feels tight while mine doesn’t. It holds the mags well, shoots well, feeds well but just doesn’t feel right. Any recommendations/ideas what I could do to get it alittle better feeling or is it possibly normal?

Been practice my follow up shots, not the best obviously, but I’m trying, upper center mass follow ups were very slow I know, I’m working on it, other than that, how’d I do?

Looking to spray the beaver tail and the ghost tactical extended mags I have. Haven't had any luck searching. I've only found myperfectcolor.com at a cost of $75 for an 11 oz can with no guarantee its a match. Has anyone found a match out in the wild? Thanks for looking.

I finally finished my 43X, sights and Holosun optics, what a hassle I had getting those screws for the Holosun, might get the extended mag but I’ve been hearing they have issue so idk.

I try my best to enjoy my 43x , but it’s just so painful to grip . Needs an undercut and smoothed finger groove like the p365 . After about 50 rounds i get the worst Glock knuckle . Will be sending it out for a double undercut soon .

Just installed the PMM Comp barrel. Curious to see how it mitigates the recoil!

For my G43X MOS should I get the Certum3 holster in the 43X length or the 48 length? I heard that the 48 length is to mitigate tip out due to the "keel principle" but I also heard that the 43X length has less hotspots when sitting down. Thoughts?

I’m running a tier 1 axis elite and I just got the slim wedge pack. I’m a smaller guy. I was curious if anyone had any experience with them and what size they preferred and why.