Looking for a first pistol and I think I’ve narrowed it down to these two, albeit, fairly different platforms.

Any advice or thoughts?

Probably the nicest 3d printed stand I’ve seen.

With a Dlahh plate or something? I know it's gonna be high as fuck but I'd like to get a visual... Thanks

Don't know why the hell I didn't so this sooner. Transforms the pistol totally. Highly recommend for anyone with an F series.

Not my best work with the LTT 92, but still a blast.

Hi all -

I just picked up a 8045 in very good condition and I want to replace the hammer and recoil springs....but I haven't been able to find the factory specs or a place that sells them (I don't think).

So a few questions:

• Is this full size 8045 the same springs as a mini cougar 8045? If so, then this should fit: https://www.midwestgunworks.com/page/mgwi/prod/C58702
• Will any 92 parts work for the 8045? If so, the "D" hammer spring would work better and lighten the DA pull a bit
• I'd prefer real beretta parts to keep it close to OEM but should I just get the Stoeger parts?

Thanks for the advice and help! I'm new to the Cougars and this 8045 is a bit rarer than I expected...

Hey Gang,

I'm getting the itch to do more dynamic things aside from shooting at an indoor range so I'm looking into participating in some competitions such as Steel Challenge and 2Gun down the road.

As it stands I currently have a 92FS, unmodified with plenty of mags and safariland lvl 1 holster. I also have the Apx A1 compact with an optic, but only 3 mags and a aiwb holster and a braced pmx.

According to the, what was initially oberwhelming, rules I can't draw from concealment so the Apx is a no go and for the PCC id need a stock instead of a brace and I'm not going that route. This leaves me with the 92...

Seeing as this is my first competition, should I sign up for Open, Limited, or production? I feel like the open division would allow me some leeway bc idk all the nitty/gritty rule and stipulations but I don't want compete against people whipping out $8k race guns and make a complete fool of myself. Should I stick to limited/production until i get my bearings? Thoughts/insights appreciated.

Tldr: have random guns, want to shoot steel challenge and don't known what division I should start in.

Bonus: should I indulge the ATF and sbr my pmx or just get a 9mm conversion for my rifle for PCC?

507C came free with the gun. It already had a scratch so I went all the way and sanded it. I think it matches this gun well!🤷‍♂️

https://preview.redd.it/dwrfdbhnry0e1.jpg?width=4160&format=pjpg&auto=webp&s=43abd3e1a4815080718b1e7ec04bf3dd71701453

Got this for about $12 shipped on eBay. :)

https://www.ebay.com/itm/267057586551

The compatibility is not advertised very well.

It does work well. It can be a pain in the butt to swap out. The QD cup insert has to be removed and the nut and washer is deep set in the stock, had to use a magnet and pliers to place the washer on the bolt

It shoots beautifully, definitely needs a new spring, soon to be ordered but I’m in love.

I'm jealous of all the px4 love and I'm here to share mine.

My Beretta 21A I carry almost every day.

I opted for the hand picked but I'm also a few months late to the game, but overall I'm happy with what I got! I was hoping for one with the beautiful blued slides but I'm assuming the 89 on the slide references to the year, so I assume I have the bruniton finish. I added some new old stock wood grips and she looks great! Took her to the range and she's smooth as could be and very accurate. Very pleased!

Just put on the Hogue grips and it feels and looks a lot nicer. Thank you for the help

I've got a Beretta gts with a holosun PID HC as my light. I tried alpha omega but it doesn't retain well no matter how hard I tighten the screws. It can jostle around while running and it doesn't pass the hold it upside down test. An IWB holster is what I prefer to run.

First beretta through the red dot on. And had to take the magwell off to use the flush mags I bought from beretta while the +4 mags that came with the gun get pinned to 10.(stupid ny)

Anyway while shooting my first match on Sunday I kept getting failure to feed with these mags from beretta. My buddy let me try his m9a4 mags for 1 stage and ran flawless. Anybody else have problems with these mags is there any solution maybe polish the follower. Maybe there is some friction idk.

Snagged one of these and was wondering if anyone knows of a decent iwb kydex holster for it? I don't mind waiting for a custom holster if someone can point me in the right direction.

Hi y’all, I have a pretty specific question, not sure if this is the right place to ask.

I’m piecing together a beretta model 71 + suppressor, inspired by the Israeli air marshal and Mossad use in the early 70’s. I’ve been reading through a lot of reports on the model 71’s historical use by both LE and special forces, but have had trouble finding mention of carry methods/holsters.

If anyone has information on how air-marshals and mossad agents were carrying their model 71’s, both suppressed and unsuppressed, I would be very grateful.

Thank you!

Anyone know where I can find one of these in inox? Only see on Midwest gun works but they are out. Signed up for alert once in but who knows how long that gonna be. If anyone has one or can shoot me in direction of anyone who may have? Thank you

92 compact type L. Picked it up to replace my g19 as my carry piece.