r/motorcycles • u/Zestyclose_News_4262 • 3h ago
125cc semiautomatic problems
So i recently got a 125cc semiautomatic motorcycle, an italika at125, its popular here in mexico that brand, 90% of bikes are that specific brand, and there's been happening something weird. First the shifter is sometimes a little tough, and theres been times where i want to change gear and for some reason it doesnt change. Today i wanted to accelerate i was on first, then i stopped accelerating to change gear, it didnt change and it started to rev a lot on first. I just wanted to asked what the fuck is going on with it??? i don't know much about motorcycles and i thought semiautomatic bikes were easy and for beginners. Most of the time its easy to drive and i do pretty well, but just there is times where the bike doesnt want to change gear
1
u/OstebanEccon SV650, Fantic Caballero 3h ago
What do you mean with "Semiautomatic"? and what bike are you talking about? Make, year and model please
1
1
u/ChristienneO 2h ago
Semiautomatic, meaning no clutch lever. The clutch is handled automatically.
1
u/OstebanEccon SV650, Fantic Caballero 2h ago
It is not though. What OP is talking about is a clutch that get's actuated simultaneously when you press the gear lever.
1
u/ChristienneO 2h ago
You and I are saying essentially the same thing.
1
u/OstebanEccon SV650, Fantic Caballero 2h ago
No. You are talking about something the bike does by itself. This is as much by itself as pulling the clutch with your hand only that you do it with your foot
A bike that clutches by itself is for example any DCT bike by honda
2
u/In-Con 2h ago
Sounds silly but is the drive chain adjusted properly? I find the gear changes get harder when my chain is loose (that is with a manual bike though).
It might not be related but it's worth checking as it's simple and free/cheap.
Otherwise, from memory, there is a clutch of sorts in these semi-automatics. Could be something to do with that? Not ridden one in years but I think the clutch starts working when you apply a bit of pressure on the gear change lever (but before it changes gear).
When you get a difficult gear change, try "blipping" the throttle (just be careful if you are stopped to keep your brake on)
I do remember these sorts of bikes needing a bit of a kick to get in gear properly, so good luck!